Features:

  • • Supports 2-14S & 200A Cont, 400A Burst
  • • DroneCAN Communication Protocol
  • Small & Compact Design
  • • Two 5V Output with Independent BEC IC and Circuitry
  • • Separated Sensor and BEC Board to Minimize Electrical Noise Interference
  • • Galvanically Isolated Current Sensor IC (AEC-Q100 Grade 1 qualified)
  • •  High Accuracy Temperature Sensor for Temperature Monitor
  • • High-Efficiency Aluminum Heat Dissipation Shell

 

Specifications:

  • • Input Voltage: 2S-14S
  • • Processor:STM32F405RG 168MHz 1024KB Flash 196KB RAM
  • • Voltage input: 7~60.9V (2S~14S)
  • • Continuous current:200A
  • • Burst current
    • • 400A @ 25℃ 1 sec
    • • 1000A @ 25℃ < 1 sec
  • •Max current sensing: 376A
  • •Voltage accuracy: ±0.1V
  • •Current accuracy: ±5%
  • •Temperature accuracy:±1℃
  • •Power port output: 5.3V/3A each port
  • •Protocol: DroneCAN
  • •Operating temperature :-25℃~105℃
  • •Firmware upgrade: Support
  • •Calibration: Support


Pinout:


Interface Type:

  • • Power & CAN Port: Molex CLIK-Mate 2mm 6Pin
  • • Battery IN/OUT Options:
    • - XT90 Connectors
    • - Tinned Wires
    • - XT90 & Ring Terminals


LED Status:

  • • Flashing quickly continuously: MCU is in the bootloader stage, waiting for firmware to be flash
  • • Flashing quickly for 3 seconds, and then on for 1 second: Waiting for CAN connection
  • • Flashing slowly (one-second intervals): CAN is successfully connected


 

Specifications:

  • • Size: 45mm×41mm×26mm (Not Include Cable)
  • • Weight: 185g (Include Cable)

 

Translation missing: en.general.search.loading