Overview: 

This PM06 Power Module supplies clean 5.2V to flight controller from the battery and provides current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable, along with integrated power distribution for 4 ESCs. It comes with pre-soldered wires, capacitor, and XT60 connector.

 

Please Note:

  • • The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. You can refer to this chart for reference.
  • • This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X & 6X (Requires a digital PM like PM02D). 

 

Specifications:

  • • Input voltage (10S version): 2S-10S
  • • Input voltage (14S version): 2S-14S
  • • PCB Cont. Current Rating: 70A
  • • PCB Burst Current Rating: 120A (<60 Sec)
  • • Output: DC 5.2V & 3A Max
  • • Ouput Max Power : 18W
  • • Voltage Divider: 18.182
  • • Amperes per Volt: 36.364
  • • Dimensions: 35x35x5mm
  • • Mounting hole: 30.5mm*30.5mm
  • • Weight: 24g


Package Includes:

  • - 1x PM06 board
  • - 1x  JST GHR 6pin 1.25mm pitch cable

 

Translation missing: en.general.search.loading