MAUCH
017 – PL-2-6s BEC 2 x 5.35V 1 x 12.0V with CFK enclosure

Premium-Line 2-6s BEC with 2 x 5.35V and 1 x 12.0V outputs Input 2-6S LiPo / max. 28V. Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output connector with Molex Clik-Mate 4p. Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes. Blue power "ON' LED. (3x) Dimensions 32mm x 50mm x 7mm / 19g without CFK enclosure 34mm x 52mm x 10mm / 24g with CFK enclosure Scope of delivery: 1x PL-2-6S BEC 2x 1x CFK enclosure 1x Sensor cable (040) Molex Clik-Mate 4p / L = 150mm 1x Backup cable (050) for Pixhawk 2.1 / Molex Clik-Mate 2.0-6p / L = 150mm 1x 12.0V output cable one site Molex Clik-Mate 1.25mm-4p, the othersite open. / L = 150mm REM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC: 041: DF13-6p -> Pixhawk 1 / APM... etc. 042: Molex Clik-Mate 2.0 - 6p -> Pixhawk 2.1 043: JST-GH-6p -> Pixhawk 3... etc