HEX - Kore - Multirotor Carrier board for Cube Autopilot
Spektreworks

The Kore is a carrier board for the Cube autopilot (cube not included) Providing a convenient layout for multirotors specifically Quads, Octocopters and Octo-Quads (X-8s)

Kore carrier board for the Cube autopilot.

FEATURES

AT-A-GLANCE Up to 12-cell Lithium battery (50.4V) 140A continuous current with 280A surges

Power and signal for ESCs conveniently located in corners 12V navigation light power available at each cornerBuilt-in power distribution

Built-in voltage and current sense

Redundant power supplies for flight critical components

Payload connectors with resettable fuses for 5V, 12V, and direct battery power

Good power and error indicator lights

Built-in buzzer with volume control

Connectors for every function of Pixhawk Cube

Easily accessible PWM voltage level selector (3.3V or 5V)

Resistant to ground bounce on PWM signal

Connector-compatible with standard ProfiCNC carrier board

Connector ports for debugging IO and FMU processors

STANDARD CABLES:

4-pin JST GH

6-pin JST GH

PAYLOAD POWER CABLES:

4-pin Clik-Mate 1.25mm (for 5V payload power) 5-pin Clik-Mate 1.25mm (for 12V payload power)

6-pin Clik-Mate 1.25mm (for battery payload power)

NOTE: Pixhawk 2.1 Cube NOT included.