Professional Remote ID device attachable to any drone

Designed with expert pilots in mind. Combination of both Network & Direct / Broadcast Remote ID to make your drone flight safe & compliant.

Remote Identification

Network Remote Identification
Dronetag Mini transfers your drone's position and identification to our cloud. By displaying the real-time data in our app Dronetag enables advanced drone operations and coordination of manned and unmanned traffic in the same airspace

Direct (Broadcast) Remote Identification<br>Your drone's info is transmitted via Bluetooth to up to 3 km (1.86 miles). With our Direct Remote ID, you fulfil all the new regulation necessities, and you are free to fly & touch the sky!

Smallest and lightest

Dronetag Mini is the smallest and lightest Remote ID device on the market. With the half size of a muesli bar, the weight of 32 g (1.1 oz), it offers everything you need to fly safe & compliant.

Independent, locked and with the longest battery life

Mini is attachable to any drone with a strong reclosable dual lock fastener (you can lift average drone by it). The device has internal GNSS, LTE and Bluetooth antennas and offers up to 14 hours of battery life.

Features 

Security at its best
Soldered chip SIM, firmware over the air updates, or DTLS encryption got you safe & secured.

Multi constellation GNSS receiver
Receiving signals from GPS, GLONASS, Galileo and SBAS for robust and reliable positioning.

Built according to the newest Remote ID standards
Compliant with Direct & Network Remote ID according to the prEN 4709-002 and ASTM F3411 Standards.

Internal LTE, Bluetooth and GNSS antennas
With an option to add external LTE and Bluetooth antennas for better signal reception.

Battery with up to 14 hours of endurance
You can also use your drone as a power source for carefree flights without the need for charging.

Take-off, landing and free-fall detection
Worry-free flight start and end. Mini warns other closed-by pilots about potential dangers.

MAVlink & DJI A3 support
Professional DJI and Pixhawk flight controllers integration via our EXT port to get onboard data.

Supported regions:

European Union ASD-STAN
Compliant with prEN 4709-002 which requires Direct Remote Identification for drones above 250 grams flying below 120 meters in the Specific category.

USA ASTM
Dronetag Beacon is Approved by FAA (check the DoC here) and Compliant with ASTM F3411 which requires Broadcast Remote ID for all pilots flying out of FAA-recognized identification areas.

Other countries
As Beacon is transmitting data via Bluetooth, it is usable anywhere in the world. All countries using ASD-STAN or ASTM standards are supported. Check your local rules. Security at its best Security at its best Soldered chip SIM, firmware over the air updates, or DTLS encryption got you safe & secured. Satellite icon Multi constellation GNSS receiver Receiving signals from GPS, GLONASS, Galileo and SBAS for robust and reliable positioning.